AKW Option EW Half Height Wet Floor Shower Screen Silverdale - Frosted

The AKW Option EW is a half-height wet room shower screen designed for level-access and assisted showering installations. This Silverdale Frosted configuration uses frosted PET panels in a silver aluminium frame, providing privacy without compromising the lightweight, shatterproof benefits of the EW range.

Available in 750mm / 900mm heights across multiple width configurations.

Specifications

Kit Contents

• 1 × Bi-folding door panel (frosted PET)
• 1 × Single return door panel (frosted PET)
• 2 × Silver wall compensators
• 1 × L-shaped easy-glide curtain rail
• 1 × 600mm trimmable ceiling support (drop rod)
• Weighted white permeable shower curtain
• Ergonomic D-handles and latches
• Wet floor seals and gaskets

For Trade & Installers

Wet Room Zone Compliance The EW range is designed exclusively for wet room / wet floor installations. The rising butt hinges raise the door on opening to prevent floor seal drag against wet room vinyl or tile gradients — this is a functional requirement, not just a convenience feature. Confirm floor gradient and surface type before specifying.

Wall Compensators Each unit ships with 14.5mm of lateral adjustment per side. Verify wall plumb before fixing — compensators do not correct for severe out-of-plumb walls beyond this tolerance.

Floor Seals The elastomeric wet-floor gaskets are profile-matched to AKW wet room floor systems. Compatibility with third-party formers or vinyl from other suppliers should be confirmed on-site before installation. Do not substitute standard shower tray seals.

Panel Material Note Panels are frosted PET, not glass.

Curtain Rail The L-shaped rail requires ceiling fixing via the drop rod. Ceiling substrate must be adequate to support the rail and curtain. Trimmable drop rod accommodates standard ceiling heights.

Lead Time / Stock: Some size variants are made to order (7-10 days)

For Homeowners & Carers

The AKW Option EW is a half-height shower screen — typically 750mm or 900mm tall — designed for open, level-access shower areas (wet rooms) rather than enclosed shower trays or cubicles.

Why half-height? A half-height screen lets a carer stand outside the shower and assist with washing without getting fully wet. The screen deflects water inward while keeping the access point wide and unobstructed.

Why frosted panels? The frosted version offers privacy for the person showering while retaining all the practical benefits of the EW range — lightweight panels that won't shatter if accidentally knocked, and doors that lift slightly as they open so they don't catch on the wet floor.

How does the bi-fold door work? The main door folds flat against itself or the wall, creating a wide, clear opening. This is particularly useful if the person showering uses a wheelchair, walking frame, or needs to be assisted into the shower with a hoist or transfer aid.

Curtain included A weighted permeable shower curtain is included in the kit. This provides an additional layer of water containment and can be easily laundered.

Is this suitable for my bathroom? These screens are designed specifically for wet rooms — bathrooms with a flat or gently sloped tiled or vinyl floor and a drain built into the floor itself. They are not designed for use with a raised shower tray. If you're unsure whether your bathroom qualifies, contact us before ordering.

FAQs

What is the difference between the Frosted and Clear versions of this screen? The panel material is the only difference — both use PET rather than glass, and both share the same EW frame, hinges, seals, and kit contents. The frosted version provides visual privacy for the person showering; the clear version allows full visibility, which some carers or clinical settings prefer.

Is PET the same as glass? No. PET is a lightweight, shatterproof polymer. It will not break into sharp shards if struck. This makes it safer in an assisted bathing environment than toughened glass. PET requires slightly different cleaning — avoid abrasive scouring pads or cream cleaners, which can cause surface hazing over time.

What type of floor does this screen require? The EW range is designed for wet room floors — a tiled or vinyl-finished floor with a built-in gradient draining to a floor-level waste. It is not compatible with raised shower trays. The bottom seals are profile-matched to wet room floor surfaces, not flat shower tray rims.

Can the door height be adjusted? The screen is supplied in fixed heights (750mm or 900mm). Select the correct height at the point of order. The wall compensators provide 14.5mm of lateral adjustment per side to accommodate minor wall irregularities, but do not alter the screen height.

Do I need to buy a curtain separately? No — a weighted permeable shower curtain is included in the kit as standard.

You May Also Need

These items are not included in the kit. Check compatibility with your specific screen size before ordering.

 If you're unsure which ancillaries are required for your project, contact us before ordering — we can confirm compatibility.

Free delivery to UK Mainland on orders over £100

£4.95 delivery to UK Mainland on orders under £100

Orders placed before 12 noon will usually be delivered next day.

Unfortunately we can't currently deliver to Northern Ireland.

Find out more

Our returns policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.

Please note that we charge a £42 restocking fee for all returns except where the item is damaged or defective.

Please call our office with your invoice number for a returns authorisation before returning any item to us.