Flair Mono Basin Mixer with Click Waste

Product Overview

A modern, single-lever mono basin mixer built from solid brass with a gloss chrome-plated finish, supplied complete with a click waste, ½" BSP flexi hoses, and all fixings. Designed for bathroom installers and builders who need a reliable, low-pressure-rated tap that arrives ready to fit with no additional parts required.

The Flair mounts vertically through a standard single-hole basin, with a 13.7 cm height and a 10.7 cm reach. The ceramic disc cartridge delivers precise flow control via a quarter-turn lever — a design that eliminates dripping, reduces wear, and keeps maintenance to a minimum over the long term. Tested to BS EN 200, it performs across a wide pressure range, from gravity-fed systems starting at 0.2 bar right up to 3 bar mains pressure, making it a practical fit for the majority of UK bathroom installations.

Benefits

Low-pressure compatible from 0.2 bar. Works reliably on gravity-fed and unvented systems alike, with no booster pump required at entry-level pressures. Delivers 3.8 L/min at 0.2 bar, scaling to 15.4 L/min at 3 bar.

Complete installation pack included. Supplied with a click waste, ½" BSP flexi hoses, and fixings. Everything needed to complete the fit is in the box — no last-minute van trips.

Ceramic disc cartridge with quarter-turn operation. Drip-resistant by design, with precise flow control from a single lever movement. Lower long-term maintenance compared to traditional rubber-washer taps.

Technical Specifications

Flow rate (L/min):

In the Box

• Flair Mono Basin Mixer (TAP001FL)
• Click waste
• ½" BSP flexi hoses (pair)
• Fixings

FAQs

Will this tap work on a gravity-fed system?

Yes. The Flair is rated from 0.2 bar, making it suitable for gravity-fed (low-pressure) systems. No booster pump is required at that pressure, though flow rate will increase significantly on higher-pressure mains installations.

Do I need to buy a separate waste for the basin?

No. A click waste is included in the box as standard. No additional waste fitting is needed.

What size hole does the basin need?

The Flair is a mono basin mixer designed for a single-hole basin installation. The base outer diameter is 5.2 cm. Check your basin's tap hole size and spacing before ordering to confirm compatibility.

Guarantee

This product is covered by a 1-year manufacturer's guarantee.

Free delivery to UK Mainland on orders over £100

£4.95 delivery to UK Mainland on orders under £100

Orders placed before 12 noon will usually be delivered next day.

Unfortunately we can't currently deliver to Northern Ireland.

Find out more

Our returns policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.

Please note that we charge a £42 restocking fee for all returns except where the item is damaged or defective.

Please call our office with your invoice number for a returns authorisation before returning any item to us.