Impey Whale Direct Connect Kit Waste Pump Kit
Impey Whale Direct Connect Kit Waste Pump Kit is backordered and will ship as soon as it is back in stock.
✅ In stock (VAT included. Learn about VAT relief eligibility)
Description
Description
The SWP/WM is a shower waste pump kit for electric shower installations where gravity drainage isn't an option. Based on the proven Switch Connect (SWP) platform, the Direct Connect removes the need for a separate flow switch by connecting directly to the electric shower's own switching mechanism — the shower controls the pump, so there's no additional component in the water supply line.
This makes the SWP/WM a cleaner, simpler installation for electric shower-only setups. It is not compatible with mixer showers — if you need to pump drainage from a mixer shower, the Switch Connect (SWP) with the SWP/MX conversion kit is the correct product.
The pump handles up to 8 litres per minute, runs a de-puddling cycle 15 minutes after the shower is switched off, and includes all fittings required for a single feed electric shower installation. Suitable for wet room floors and shower trays. For wet room floor installations, a TAD13 shallow waste gully is required separately.
Warranty: 3 years, extendable to 5 years on registration.
Specification
|
Attribute |
Detail |
|
Product code |
SWP/WM (SDP044T) |
|
Brand |
Impey / Whale |
|
Pump activation |
Direct connection to electric shower |
|
Max drainage — electric showers |
8 litres per minute |
|
Max drainage — mixer showers |
Not compatible |
|
Adjustable settings |
12 settings |
|
De-puddling cycle |
Yes — runs briefly 15 minutes after shower is turned off |
|
Self-priming |
Yes |
|
Protective cover |
Included |
|
Low voltage transformer |
Yes — conforms to EN60742 |
|
Active link diagnostics |
Yes |
|
IP rating |
IP45 |
|
Bluetooth compatible |
No |
|
Noise reduction / anti-vibration |
No |
|
External switch to run pump |
No |
|
Auto shower-stop (Mira) |
No |
|
Shower compatibility |
Electric showers only |
|
Warranty |
3 years (5 years with registration) |
Product Features
- Direct connection to electric shower — no flow switch required in the water supply
- Pump is controlled by the shower itself, simplifying installation and reducing components
- Maximum drainage of 8 l/min for electric showers
- De-puddling cycle clears residual water 15 minutes after shower is switched off
- Self-priming pump with protective cover
- Low voltage transformer conforming to EN60742
- Active link diagnostics for fault identification
- 12 adjustable settings
- IP45 rated
- Includes all fittings for a single feed electric shower installation
- Suitable for wet room floors and shower trays
SWP/WM is the right choice if: You're installing an electric shower that supports direct pump connection and want a clean installation without a separate flow switch.
Consider SWP if: You need mixer shower compatibility, or your electric shower doesn't support direct connection.
Consider SWP/IMBT if: You're fitting a Mira Advance Flex Extra and want Bluetooth auto shower-stop.
Consider SWP/IMP if: You need auto shower-stop, an external switch, or built-in anti-vibration noise reduction.
For Specifiers and Installers
The SWP/WM connects directly to the electric shower's pump terminal rather than using a flow switch in the water supply line. This removes one component from the installation and means the pump activation is governed entirely by the shower's own switching — there's no separate sensor to commission or calibrate for flow detection.
Installation notes:
- Electric showers only — direct connection compatibility must be confirmed before installation
- Not suitable for mixer shower installations; use SWP with SWP/MX for those
- For wet room floor installations, the TAD13 shallow waste gully is required separately and is not included in the kit
- 12 adjustable settings allow pump output to be matched to the installation
- Active link diagnostics support fault-finding on site
- IP45 rated
- Warranty is 3 years standard, extended to 5 years on product registration with Impey
For Homeowners and Family Members
If you're having a new electric shower fitted in a room where the waste water can't drain away by gravity — for example, a ground floor wet room or a bathroom where the drain run has no fall — a pump kit is the standard solution.
The Direct Connect works automatically: when you turn the shower on, the pump starts. When you turn it off, the pump runs a brief cleaning cycle about 15 minutes later to clear residual water, then stops. No buttons to press.
Because it connects directly to the electric shower rather than using a separate sensor in the pipework, there are fewer components involved — which some installers prefer for simplicity. Your installer will need to confirm that your specific electric shower model supports a direct pump connection before ordering.
Please note: Pump kits require correct installation by a qualified plumber or bathroom installer familiar with pumped drainage systems.
Delivery & Shipping
Delivery & Shipping
Free delivery to UK Mainland on orders over £100
£4.95 delivery to UK Mainland on orders under £100
Orders placed before 12 noon will usually be delivered next day.
Unfortunately we can't currently deliver to Northern Ireland.
Returns & Refunds
Returns & Refunds
Our returns policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange.
Please note that we charge a £42 restocking fee for all returns except where the item is damaged or defective.
Please call our office with your invoice number for a returns authorisation before returning any item to us.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

